✓ オンライン注文による24時間年中無休の自動処理システム
✓ 知識豊富で専門的な製品&テクニカルサポート
✓ 迅速で信頼性の高い(再)注文
カタログ番号 / ID. 250102
✓ オンライン注文による24時間年中無休の自動処理システム
✓ 知識豊富で専門的な製品&テクニカルサポート
✓ 迅速で信頼性の高い(再)注文
QIAcuityプローブPCRキットには、QIAcuityナノプレートに最適化された、4x マスターミックスが含まれています。 このキットは、プローブベースのデジタルPCRの特異性と効率を高め、正確なシングルプレックス解析から最大5プレックス解析までをカバーします。 QIAcuityプローブマスターミックスは、QIAcuity dPCR装置でのgDNAまたはcDNAの正確な定量のための特異性を高めるように最適化されています。
本キットは QIAcuity デジタルPCR システム および QIAcuity ナノプレートと組み合わせて使用します。
製品について詳しくお知りになりたい場合は、弊社のdPCRスペシャリストから連絡を差し上げますので、こちらからサインインしてください。
優れたパフォーマンス
加水分解プローブを使用した本QIAcuityマスターミックスは、QIAGENの最新のDNAポリメラーゼを採用しています。新しいQuantiNova DNA Polymeraseとナノプレートに最適化されたQIAGEN独自のバッファーテクノロジーの組み合わせは、感度、再現性、効率において、誤差の少ない結果を提供します。
加水分解プローブによるマルチプレックスPCR
QIAcuity プローブPCRキットの特別なマスターミックスは、QIAcuityナノプレート上のウェルにおいて、最大5倍のターゲットの量の差を正確に定量することができます。これにより、時間とコストを節約し、必要なサンプルの量を減らすこともできます。 さらに、得られた二重または多重PCRデータは、シングルプレックスPCRから得られたものと同等です。
最大100時間までの反応安定性
QIAcutiy PCRミックスは、その後の反応のパフォーマンスを損なうことなく、30℃で最大100時間保存できます。 この優れた安定性は、冷却剤を使用せずに室温で長期間保管できるため、ハイスループット処理でのサンプルセットアップやプレートスタッカーでの自動化にも対応できます。
QIAcuity プローブPCRキットは、新しい抗体を使ったホットスタート機構により、シングルプレックスまたはデュプレックスでのcDNAまたはgDNA解析を高い特異性をもって実現します。 低温でQuantiNova DNAポリメラーゼは、QuantiNova抗体および新しい添加剤QuantiNova Guardによって不活化状態を維持します。これにより、ホットスタートでの不活化状態がより向上し、非特異的にアニーリングしたプライマーおよびプライマーダイマーの伸長を強く抑制します。 温度を95°Cに上げると、2分以内にQuantiNova抗体とQuantiNova Guardは変性し、QuantiNova DNAポリメラーゼが活性化され、PCR増幅が可能になります。
ナノプレートでのdPCRの詳細は、こちら
qPCR実験のようにサンプル調整には、マスターミックス、プローブ、プライマーを96または24ウェルナノプレートへ加え、その後サンプルを加えるステップは存在しますが、 このシステムでは、サンプルの分配、PCR増幅およびイメージングを1台の装置の中で自動化し、サンプルから結果までを2時間以内に完了します。 ソフトウェアは、ターゲットシーケンスのマイクロリットルあたりのコピー数を計算するだけでなく、ポジティブサンプルやNTCなどのコントロールも同時に解析します。またこの解析は、同じローカルエリアネットワーク(LAN)内の離れた場所のPCでも行えます。
QIAcuity Probe PCR Kitは、QIAcuityデジタルPCRシステムおよびQIAcuity ナノプレートとともに、以下のアプリケーションでのcDNAやgDNAの定量的解析に利用できます。
Version 2.1
Version 2.1
Version 1.2
The QIAcuity Software Suite 1.2 is designed to be installed on a Windows PC that is connected to one or more QIAcuity instruments. The QIAcuity Software Suite enables the user to set up plates, analyze results, and monitor the status of runs in real time. For this configuration, the QIAcuity instrument needs to be connected to a network through Ethernet. Alternatively, a direct cable connection between the QIAcuity and the notebook where the QIAcuity Software Suite is running needs to be established. When connected to a network, up to 10 users may access the QIAcuity Software Suite via a browser installed on the client PC (Windows or Mac).
The following browsers are supported in the QIAcuity Software Suite:
-Mozilla Firefox (version 64.0.2 or higher)
-Microsoft Edge (version 44.17763.1.0 or higher)
-Google Chrome (version 71.0.3578.98 or higher)
The new QIAcuity Software Suite 1.2 offers a functionality that enables users of the QIAcuity Software 1.1.3 to upgrade to the new version while keeping the library of previously stored plate runs.
Note: If you have exported plates from QIAcuity Software Suite 1.1.3 that you would like to import and use in QIAcuity Software Suite 1.2, you will need to import the plates before upgrading from version 1.1.3 to version 1.2. You may then export the plates again. Future software version starting from QIAcuity Software Suite 2.0 will facilitate import of plates from previous QIAcuity Software Suite versions.
The new improvements are as follows:
-Support for the Nanoplate 8.5k 24-well
-Hyperwell functionality to combine several wells to one combined well for analysis
-Automated plate archiving functionality
-Functionality to show the number of single/double positives in 2D scatterplots
-VPF (Volume Precision Factor) to further improve concentration calculation (see related resources)
-Additional improvements for stabilization and troubleshooting
Version 2.1
Beside of improvements and bug fixes, the new features mainly address the GMP requirements by offering additional support for 21 CFR part 11 compliance and get the software ready for future Nanoplate support.
For more information, please refer to the Release Note: QIAcuity Instrument Control Software, Version 2.1.
SHA1 checksum: 0DD41A8DE46D10E81F538ACB71AC184170D39FE0
Version 1.2
The QIAcuity Software Suite 1.2 is designed to be installed on a Windows PC that is connected to one or more QIAcuity instruments. The QIAcuity Software Suite enables the user to set up plates, analyze results, and monitor the status of runs in real time. For this configuration, the QIAcuity instrument needs to be connected to a network through Ethernet. Alternatively, a direct cable connection between the QIAcuity and the notebook where the QIAcuity Software Suite is running needs to be established. When connected to a network, up to 10 users may access the QIAcuity Software Suite via a browser installed on the client PC (Windows or Mac).
The following browsers are supported in the QIAcuity Software Suite:
-Mozilla Firefox (version 64.0.2 or higher)
-Microsoft Edge (version 44.17763.1.0 or higher)
-Google Chrome (version 71.0.3578.98 or higher)
The new QIAcuity Software Suite 1.2 offers a functionality that enables users of the QIAcuity Software 1.1.3 to upgrade to the new version while keeping the library of previously stored plate runs.
Note: If you have exported plates from QIAcuity Software Suite 1.1.3 that you would like to import and use in QIAcuity Software Suite 1.2, you will need to import the plates before upgrading from version 1.1.3 to version 1.2. You may then export the plates again. Future software version starting from QIAcuity Software Suite 2.0 will facilitate import of plates from previous QIAcuity Software Suite versions.
The new improvements are as follows:
-Support for the Nanoplate 8.5k 24-well
-Hyperwell functionality to combine several wells to one combined well for analysis
-Automated plate archiving functionality
-Functionality to show the number of single/double positives in 2D scatterplots
-VPF (Volume Precision Factor) to further improve concentration calculation (see related resources)
-Additional improvements for stabilization and troubleshooting
Version 2.0
The QIAcuity Software Suite 2.0 is designed to be installed on a Windows PC that is connected to one or more QIAcuity instruments. The QIAcuity Software Suite enables the user to set up plates, analyze results, and monitor the status of runs in real time. For this configuration, the QIAcuity instrument needs to be connected to a network through Ethernet. Alternatively, a direct cable connection between the QIAcuity and the notebook where the QIAcuity Software Suite is running needs to be established. When connected to a network, up to 10 users may access the QIAcuity Software Suite via a browser installed on the client PC (Windows or Mac).
This new software version now supports 21 CFR Part 11 regulations for users working under GMP. This includes the following:
-Advanced User Management
-Audit Trail
-Signatures
Additional changes compared with the previous software version include the following:
-Usability improvements
-Improved dust detection
-Hyperwell expansion to CNV and GEX analysis
-CSV export functionality of multiple positive partitions for linkage analysis, drop-off assays, etc.
-Raw data export
SHA1 checksum: C60C4EEC349DF1C037796016D32A93EEC19B54A0
Version 2.1
Beside of usability improvements and bug fixes, the new features address GMP requirements by offering additional support for 21 CFR part 11 compliance, copy number variation (CNV) analysis, support of future Nanoplates, and improved 1D scatterplot views.
For more information, please refer to the Release Note: QIAcuity Software Suite, Version 2.1
SHA1 checksum: 6D51E273B26FA7D7E0EDA843CB3DCD74B38FA5B1
Version 2.1
Version 2.1